Riverside Hydronics ProtoNode Especificaciones Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 25
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Riverside Hydronics
®
, LLC – 34-160 10/11
990 Haltom Road - Fort Worth, Texas 76117 - Tel 1-800-990-5918 Page | 11
The TIER 1 SYSTEM STATUS screen is provided to monitor the most commonly need system
informationformultipleboiler.Thefirstscreendisplaythisinformationforuptoeightboileranda
supplementalscreenTIER 1912displaysthesameinformationforboilers9to12.
SYSTEM
TEMPdisplaysthecurrentsystemtemperature.
OUTDOOR TEMP displays the
currentsystemtemperature.
ADJUSTED SETPOINT displays the
set point after a reset function
such as Outdoor Reset, Scheduled
Setbackor Remot eSetpoint
adjustment have been made. This
is the same parameter as is
locatedontheTier1menu.
SETPOINT is the current
set point
foreachboilerinthesystem.
INLETthisisthecurrentmeasuredreturnwatertemperatureofeachboiler inthesystem.
OUTLETthisisthecurrentmeasuredsupplywatertemperatureofeachboilerinthesystem.
The OUTLET temperature displays can be turned off when not used
as shown here by
touchingthedisplay.
Thenumericaldisplayboxeslocatedatthebottomofthescreenindicatedthetimeelapsed
asthe controlcountsuptoenabletherespectiveboiler (top)or downtodisable (bottom).
ThetotaltimeisenteredonOPTIONSCREEN1.
Thereis
aTIER2SYSTEMSTATUSscreenwhichprovidesthesameinformationfortheTier2boilers
withaddressesfrom13to20.
TIER 1 SYSTEM S
T
ATU
S
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Comentarios a estos manuales

Sin comentarios